4. Press the HOME button to exit the configuration mode.
2.
关闭按键的无限循环功能
2. Turn off the infinite loop function of the button
（请不要在有按键被锁定的状态下进入配置模式
,
例如
A
键处于无限循环状态
,
请再次按下
A
键退出此状态）
(Do not enter the configuration mode when a button is locked. For example, when
A is in the infinite loop state, please press A again to exit this state.)
1.
同时按下
HOME +
十字键上并松开，进入无限循环功能配置模式
1. Press the HOME+ Up of the cross button at the same time and release to enter
the infinite loop function configuration mode.
2.
将需要关闭无限循环功能的按键按住不放，再按一下中左键，即可关闭对应按键的无限
循环功能
2. Hold down the button that need to turn off the infinite loop function, and then
click the Middle left button to turn off the infinite loop function of the
corresponding button.
3.
按一下
HOME
键，退出配置模式
3. Press the HOME button to exit the configuration mode.
4:
注意此按键依然处于连发模式
,
要解除连发状态
,
请参考相关教程
