button is pressed, the button is locked in the held down state until the button is
pressed again and released. This function can achieve an infinite automatic
operation of one button.
1.
开启按键的无限循环功能
1. Turn on the infinite loop function of the button
（请不要在有按键被锁定的状态下进入配置模式）
(Do not enter the configuration mode when a button is locked.)
1:
先将目标按键设置为连发或者一键连招
(
方法请参考设置连发教程
)
1: Set a button in the burst or auto combo state (please refer to the auto combo
setting tutorial).
2.
同时按下
HOME +
十字键上并松开，进入无限循环功能配置模式
2. Press the HOME+ Up of the cross button at the same time and release to enter
the infinite loop function configuration mode.
3.
将需要开启无限循环功能的目标按键按住不放，再按一下中右键，即可开启对应按键的
无限循环功能
3. Hold down the target button that need to turn on the infinite loop function,
and then click the Middle right button to turn on the infinite loop function of the
corresponding button.
4.
按一下
HOME
键，退出配置模式
