C
：连发（默认关闭）
C: Burst (off by default)
连发控制是用来将选定的按键配置为连发模式，当按键处于连发模式下，该键被按下后，
就会以一定频率模拟按下
-
松开
-
按下
-
松开事件，连发频率可调
Burst control is used to configure the selected button to a burst mode. When the
button is in a burst mode, once it is pressed, it will simulate the pressing-releasing
event at a certain frequency, and the frequency is adjustable.
1.
开启连发
1.
Turn on the burst
A.
同时按下
HOME+
左键并松开，进入连发功能配置模式
A. Press the HOME+ Left button at the same time and release to enter the burst
function configuration mode.
B.
将需要开启连发功能的按键按住不放，再按一下中右键，即可开启对应按键的连发功能
B. Hold down the button that needs to turn on the burst function, and then press
the Middle right button, so that the burst function of the corresponding button
can be turned on.
