Monster Masher
F926
Instructions for Use
Please read and retain these instructions for future reference
v002: 16/09/19
ALWAYS TURN THE POWER OFF AT THE POWER SOURCE BEFORE YOU INSERT OR REMOVE
THE WALL PLUG. REMOVE BY GRASPING THE PLUG – NEVER PULL ON THE CORD.
THIS APPLIANCE IS NOT INTENDED FOR USE BY PERSONS (INCLUDING CHILDREN) WITH
REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES, OR LACK OF EXPERIENCE OR
KNOWLEDGE, UNLESS THEY HAVE BEEN GIVEN SUPERVISION OR INSTRUCTION CONCERNING
THE USE OF THE APPLIANCE BY A PERSON RESPONSIBLE FOR THEIR SAFETY. CHILDREN SHALL
NOT PLAY WITH THE APPLIANCE. CHILDREN MUST BE SUPERVISED TO ENSURE THAT THEY
DO NOT PLAY WITH THE APPLIANCE.
DO NOT USE IN A POT STILL ON THE COOKTOP, AS THE POWER CORD MAY ACCIDENTALLY
BECOME DAMAGED BY HEAT.
DO NOT PLACE THIS APPLIANCE ON OR NEAR A HOT GAS FLAME, ELECTRICAL ELEMENT OR
HEATED OVEN.
DO NOT LET THE POWER CORD OF AN APPLIANCE HANG OVER THE EDGE OF A TABLE OR
BENCH TOP OR TOUCH ANY HOT SURFACE.
DO NOT OPERATE THIS APPLIANCE WITH A DAMAGED CORD OR AFTER THE APPLIANCE HAS
BEEN DROPPED OR DAMAGED IN ANY MANNER. IT MUST BE REPLACED BY THE
MANUFACTURER OR ITS SERVICE AGENT OR A SIMILARLY QUALIFIED PERSON IN ORDER TO
AVOID A HAZARD.
FOR HOUSEHOLD USE ONLY.
USE THE MASHER ONLY AS INTENDED. DO NOT USE NEAR WATER, OUTDOORS OR IN A
BATHROOM.
DO NOT IMMERSE THE MOTOR UNIT IN WATER OR ANY OTHER LIQUID. THE MASHING
ATTACHMENT IS SIMPLY REMOVED FROM THE MOTOR UNIT FOR WASHING SEPARATELY.
NEVER BLEND HOT OIL OR FAT.
REMOVE ALL PACKAGING INSIDE AND OUT BEFORE USE.
CLEANING INSTRUCTIONS:
•
Before cleaning your potato masher you must remove it from the power source.
•
The mashing head can be removed from the stirrer and handle for washing, by twisting
clockwise.
•
For further cleaning you can remove the mashing blade from the mashing head by twisting
clockwise.
•
Wash both the masher head and masher blade in warm soapy water.
•
Once the masher head and blade are completely dry you can re-attach them to the motor.
Simply slot the masher head onto the bottom of the stirrer and click clockwise into place. So
that it is securely fitted to the stirrer.
•
To re-attach the blade to the masher head slot onto the plastic in the centre, push down and
then twist anti-clockwise so that it clicks firmly into place.
•
Store the potato masher in a clean, dry place.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those that
are ASTA or BSI approved to BS1362 and with a rated current of 3-amps should be used. If there is a
fuse cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is lost or
damaged the plug must not be used. Spare fuse holders and fuses are available from electrical
outlets. If the socket outlets in your home or office are not suitable for this product’s plug, the plug
