Monster Masher
F926
Instructions for Use
Please read and retain these instructions for future reference
v002: 16/09/19
Place the blender upside down, rotate
the masher blade anticlockwise (if
blending shaft and the blender do no
assemble well, the masher blade
cannot be assembled well
accordingly.) Warning: You should hold
the blender lightly with your hand,
Picture 2.
Assemble the blending shaft and body
well anticlockwise, Picture 3.
Picture 2 Picture 3
•
Plug the potato masher into the power source.
•
Select either the I or II power function depending on the speed you want. Hold either the I or II
button down whilst you mash your potatoes. To stop mashing simply stop pressing on the
button.
•
Move the masher up and down through the potatoes until they have all been processed. This
should only take a few seconds.
•
Keep the potato masher running as you lift it from the ingredients (but still within the bowl or
dish you are using), to clear any excess mash from the masher.
•
DO NOT USE for longer than cycles of 1 minute at a time. Allow to rest for 1 minute in between
each 1 minute cycle.
•
Turn the masher off at the power point and unplug it. Then remove the masher head from the
unit to clean by turning it clockwise. Scrape food from blending shaft and masher blade.
WARNINGS / CAUTIONS:
Please read these instructions thoroughly before using this appliance or connecting to the mains
supply. Retain for future reference
THIS APPLIANCE MUST NOT BE EARTHED.
DO NOT ALLOW THIS PRODUCT TO BE EXPOSED TO RAIN OR MOISTURE DURING USE OR
STORAGE. BEFORE SWITCHING ON, MAKE SURE THAT THE VOLTAGE OF YOUR ELECTRICITY
SUPPLY IS THE SAME AS THAT INDICATED ON THE RATING LABEL. CONNECTING IT TO ANY
OTHER POWER SOURCE MAY CAUSE DAMAGE.
THIS PRODUCT HAS BEEN DESIGNED TO MASH FOOD. IT IS INTENDED TO BE HAND HELD
AND TO BE USED IN POTS, PANS OR THE LIKE, AFTER THEY HAVE BEEN REMOVED FROM A
COOKING SURFACE. IT SHOULD NOT BE USED FOR ANY OTHER PURPOSE.
THE BLADE IS PLASTIC. DO NOT PLACE HANDS OR FINGERS IN THE BLADE AREA WHEN THE
POWER IS CONNECTED TO THE APPLIANCE.
NEVER TOUCH THE BLADE WHEN IT IS SPINNING.
KEEP HAIR AND LOOSE CLOTHING AWAY FROM THE MASHER TO AVOID ANY CHANCE OF
THEM BECOMING ENTANGLED IN THE BLADE.