Leaf Blower Vac
9242
Instructions for Use
Please read and retain these instructions for future reference
v003: 06/02/18
Page No. 7
Extension Cords and Reels
The appliance should be supplied via a residual current device (RCD) with a tripping current of not more than
30 mA.
When the power tool is to be used outdoors, use only extension cords intended for outdoor use and are so
marked.
Always unwind any extension cords fully.
For extension cords up to 15 meters use a wire cross section of 1.5mm2.
For extension cords over 15 meters but less than 40 meters use a wire cross section of 2.5mm2.
Always replace a damaged extension cord before using it.
Protect your extension cord from sharp objects, excessive heat and damp or wet locations.
Stay Alert
Watch what you are doing, use common sense, and do not operate the power tool when you are tired, if
taking medication that causes drowsiness, when having consumed alcohol or taken drugs.
Check Damaged Parts
Before using the power tools it should be carefully checked to determine that it will operate properly and
perform its intended function.
Check for the correct alignment of moving parts ensuring they do not bind. Check for broken or missing parts
and have them replaced or repaired at an authorized service centre. Check any other condition that may
affect the operation of the power tool.
A guard or any other part of the power tool that is damaged should be properly repaired or replaced by an
authorized service centre unless otherwise indicated in this instruction manual.
Any switch that does not operate correctly must be replaced by an authorized service centre.
Do not use the power tool if the ON/OFF switch does not turn the power tool ON and OFF.
Warning
Do not attempt to modify the power tool in any way. The use of any attachment or accessory other than
those recommended in this instruction manual could result in damage to the power tool and injury to the
operator.
Have your power tool repaired by an authorised service facility.
This electric power tool complies with national and international standards and safety requirements. Repairs
should only be carried out by qualified persons and using original spare parts. Failure to do so may result in
considerable danger to the user.
Fire Precautions
When using certain power tools inside your house or workshop general fire precautions should be observed.
As a precaution it is recommended that an expert is consulted on obtaining and using a suitable fire
extinguisher.
SPECIFIC SAFETY INSTRUCTIONS
LEAF BLOWER VAC
WARNING!
Never allow children or people who have not read and understood these instructions to use the Leaf Blower
Vac. Do not use the Leaf Blower Vac for any purpose other than those described in these instructions.
