background image

 
 

 

 

Leaf Blower Vac                         

9242                    

Instructions for Use 

 

Please read and retain these instructions for future reference

                                             

v003: 06/02/18 

 

Page No. 4 

Warning 

The vibration emission during actual use of the power tool can differ from the declared total value 
depending on the ways in which the tool is used. 
There is the need to identify safety measures to protect the operator that are based on an estimation of 
exposure in the actual conditions of use (taking account of all parts of the operating cycle such as the times 
when the tool is switched off and when it is running idle in addition to the trigger time). 
 

GENERAL SAFETY INSTRUCTIONS 

Before attempting to operate this machine, it is important that you read, understand and follow these 
instructions very carefully. They are designed for the safety of yourself and others and to ensure a long and 
trouble free service life from your machine. 
This appliance is not intended for use by persons (including children) with reduced physical, sensory or 
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or 
instruction concerning use of the appliance by a person responsible for their safety. 
Children should be supervised to ensure that they do not play with the appliance. 
1.

 

Training 

 

Read the instructions carefully. Be familiar with the controls and the proper use of the appliance. 

 

Never allow children to use the appliance. 

 

Never allow people unfamiliar with these instructions to use the appliance. Local regulations may 
restrict the age of the operator. 

 

Never operate the appliance while people, especially children, or pets are nearby. 

 

The operator or user is responsible for accidents or hazards occurring to other people or their 
property. 

2.

 

Preparation 

 

While operating the appliance, always wear substantial footwear and long trousers. 

 

Do not wear loose clothing or jewellery that can be drawn into the air inlet. Keep long hair away 
from the air inlets. 

 

Wear protective goggles while operating. 

 

To prevent dust irritation the wearing of a face mask is recommended. 

 

Before using, check the supply and extension cord for signs of damage and aging. Do not use the 
appliance if the cord is damaged or worn. 

 

Never operate the appliance with defective guards or shields, or without safety devices, for example 
debris collector in place. 

 

Only use a weather proof extension cable fitted with a coupler according to IEC 60320-2-3. 

3.

 

Operation 

 

Always direct the cable to the rear away from the appliance. 

 

If a cord becomes damaged during use, disconnect the supply cord from the mains immediately. DO 
NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. 

 

If the supply cord is damaged, it must be replaced by a qualified electrician in order to avoid a 
hazard.    

 

When using an extension cord, it shall not be less than H05VV-F 2x 1.0mm²)(10 Amps). 

 

Do not carry the appliance by the cable. 

 

Disconnect the appliance from the mains supply 

·

 

whenever you leave the machine; 

·

 

before clearing a blockage; 

·

 

before checking, cleaning or working on the appliance; 

·

 

if the appliance starts to vibrate abnormally. 

Summary of Contents for GEBV004














Reviews: