Leaf Blower Vac
9242
Instructions for Use
Please read and retain these instructions for future reference
v003: 06/02/18
Page No. 11
Starting the Leaf Blower Vac
Before starting the Leaf Blower Vac, ensure that the two intermediate suction/blower tubes together with
the machine body are fitted correctly.
Using the Leaf Blower Vac
Do not attempt to pick up wet debris, allow fallen leaves etc, to dry out before using the Leaf Blower Vac.
The Leaf Blower Vac can be used to blow debris from patios, paths, driveways, lawns, bushes and borders. It
will also pick up leaves, paper, small twigs and wood chippings. When the using the Leaf Blower Vac in
Vacuum mode, the debris is sucked up through the suction tube before being ejected into the debris
collection bag, as the debris passes through the suction fan it is partially shredded. The shredded organic
debris is ideal to use as mulch around plants.
Warning! Any hard objects, such as stones, tin cans glass etc, will damage the suction fan.
Important
Do not use the Leaf Blower Vac to suck up water or very wet debris.
Never operate the Leaf Blower Vac without the debris collection bag fitted.
Operating the Vacuum-Blower
WARNING: IF THE CORD HAS BEEN DAMAGED, HAVE IT REPLACED BEFORE USING THE BLOWER.
Fig. 7
Blower mode
Inspect the area to be worked before starting. Remove any objects or debris that could be thrown, jammed
or become entangled in the Leaf Blower Vac.
Select the blow function using the selector lever on the side of the machine (Fig.7) and switch on. With the
Leaf Blower Vac resting on its wheels, move the Leaf Blower Vac forwards directing the nozzle at the debris
to be cleared.
Alternatively hold nozzle just above the ground and swing the machine from side to side, moving forwards
and directing the nozzle at the debris to be cleared. Blow the debris into a convenient heap then use the
vacuum function to collect the debris.
