Burgundy 2in1 Vacuum 600W
J038
Instructions for Use
Please read and retain these instructions for future reference v002:16/04/21
HOW TO CLEAN:
1.
Push the dust bin lip release button and empty the bin.
2.
Push the dust bin release button and remove the dust bin from the main machine.
3.
Remove the HEPA filter from the dust bin. Clean the dust bin and HEPA filter.
Please read this instruction manual thoroughly before starting and ensure you are familiar with
the operation of your new 2in1 vacuum
.
3. Insert the extend tube into the
main machine
Assembly Tips:
Stand the vacuum on its end then add the handle and
clip into place.
The clip is next to the electric cable.It is tight to get the
clip to click in place . Move the handle slightly from left
to right and put pressure on the clip and wait for it to
click.
Another way of putting the clip in place is to put your
thumb on the clip which is shown in photo 1 and push
down and push the handle toward the vacuum part and
at the same time move the clip very slightly left and right
and it willl click in place shown in photo 2.
1
2
4. Insert the floor brush into the extend tube
5. Regularly clean and empty the filter and inside of the vacuum of all dust/grit.to
avoid risk of overheating
.
