2
How to Change the Peeling Blade:
The Auto Peeler comes with 1x cutter blade affixed
and 2 spares which are stored in the base of the
product. Blades will require changing once they
become blunt from use or if the blade begins to
skip or jam. To change the blade:
1.
Remove a spare cutter blade from the blade
storage compartment located on the base of the
product.
2.
Remove the cutter head by gently pressing in the
grip on the right hand side of the blade and
pulling the lock in attachment from the cutter
arm.
3.
Unlatch and slide the used blade away from the
blade holder in a downward movement. Dispose
of the used blade safely following your local
authority disposal regulations.
4.
Affix the new blade by sliding down the ridge of
the blade holder until the small red latch clicks
into place. Make sure the blade is securely in
place before proceeding
5.
Insert the cutter head back into the cutter arm
and ensure it is securely in place.
Helpful Hints:
When choosing foods to be peeled, choose
fruits and vegetables that are firm and
symmetrically shaped.
Fruit and vegetables more than 14cm (5.5”)
tall or 11cm (4
3
/
8
”) wide should be cut in half
so that the Auto Peeler is able to grip them
between the upper food holder and the
bottom food holder.
Use plastic blemish knife to remove any
blemishes from fruit and vegetable before
and after peeling.
Warning:
Do NOT touch cutter blade when in use, it is
very sharp.
Take care when handling the cutter blade.
Do NOT immerse in water
Cleaning:
Wipe clean using a soft, soapy damp cloth. Dry
thoroughly before further use or storing.
Disposal:
Dispose of the packaging at your local recycling
centre.
Dispose of paper and carton separately from
plastic bags.
Dispose of the appliance at the end of its lifespan
at your local authorised household waste
recycling centre.
Dispose of all used cutter blades following local
authority disposal regulations.
Dispose of batteries safely and in accordance
with your local authority regulations.
