23
PERIODICAL SERVICE POINTS
1. Air cooling system
Dust clogging around the cooling system and
the cylinder fins will cause overheating of the
engine. Periodically check and clean the
cooling system and the cylinder fins with a
brush after removing the cylinder cover, the
air cleaner and the recoil case. When
installing the cylinder cover and the cooling
system, make sure that switch wires and
grommets are positioned correctly in place
(F25).
Note
After removing the spark plug, be sure to
block the air intake hole.
1. Using a wire hook, take out the filter from
the filter port (26).
2. Disassemble the filter and wash with
petrol, or replace with a new one if
needed.
(1) Fuel filter
Note
After removing the filter, use a pinch to hold
the end of the suction pipe.
When assembling the filter, take care not to
allow filter fibres or dust inside the suction
pipe.
Maintenance
(F25)
(F26)
