24
2. Oil tank
(a) Using a wire hook, take out the filter
from the filler port (F27).
(2) Oil filter
(b) Disassemble the filter and wash with
petrol, or replace with new one if
needed. When putting the filter back
into the tank, make sure that it is fitted
correctly. Also clean off any dirt in the
tank.
(c) Fuel Filter
Disassemble the filter and wash with
petrol, or replace with new one if needed.
(d) Front and rear dampers
Replace if adhered part is cracked or
peeled.
4. Spark plug
Clean the electrodes with a wire brush and
reset the gap to .025in as necessary (F28).
5. Sprocket
Check for cracks and for excessive wear
interfering with the chain drive. If the
wearing is found obviously, replace it with
new one. Never fit a new chain on a worn
sprocket, or a worn chain on a new
sprocket (F29).
Maintenance
(F27)
(F28)
(F29)
