Cordless Lawn Mower
10679
Instructions for Use
Please read and retain these instructions for future reference
v004: 13/06/17
REMOVE THE BATTERY FROM MOWER
Note: The battery can be removed from the mower.
Step 1: Open the battery cover
Step 2: Pull the fixing buckle
Step 3: Remove the battery
CHARGING PROCEDURE
Note: The battery can’t be charged in the mower. The charger that is supplied with this mower is a
specially designed 2-stage charger.
Step 1: The red light will light up during the recharge cycle.
Step 2: The green light will light up when the battery is fully charged.
1)
Remove the battery and plug the charger connector into the battery input connector. See
diagram below.
2)
Insert the 220-240V plug from the charger into the electrical outlet.
3)
The red light on the charger should come on, which indicates that the charger is working and
the battery is being charged. The red light will go out and the green light will come on when
the battery is completely charged (it takes approximately 1.5 hours to charge a fully
discharged battery).
Connect the battery into the charger as shown
