background image

 
 

 

Cordless Lawn Mower 

10679

 

Instructions for Use 

Please read and retain these instructions for future reference

 

v004: 13/06/17 

 

 

NOTE: Be sure to replace the parts in the exact order in which they were removed. When installing 
the cutting blade, verify that it is installed with the curved ends pointing toward the mower deck. 
 

CLEAN THE MOWER 

WARNING: To reduce the risk of electric shock and damage to the mower, do not expose the mower 
to water. 
The underside of mower deck should be cleaned after each use as grass clippings, leaves, dirt and 
other debris will accumulate causing rust and corrosion. 
Remove any build-up of grass and leaves on or around the motor cover (do not use water). Wipe the 
mower clean with a dry cloth occasionally. 

 

If debris build up on the underside of the unit while using, stop the motor and REMOVE THE 
SAFETY KEY. Tilt the mower forward, or on its side, and scrape it clean with an appropriate tool. 

 

STORAGE 

The following steps should be taken to prepare the lawn mower for storage. 

 

Remove Safety Key. 

 

Clean mower as instructed in previous section. 

 

Inspect and replace/sharpen blade, if required. Refer to the Maintenance section. 

 

Store mower in a dry, clean area. Do not store next to corrosive materials, such as fertiliser and 
rock salt. 

 

Store mower indoors, in a cool, dry place, out of the reach of children. Do not cover lawn mower 
with a solid plastic sheet. 

 

Plastic coverings trap moisture around the mower causing corrosion. 

 

The handle may be folded away completely for storage. 

 

Loosen the handle knobs on the sides of the handle, and fold the upper handle down. 

 

Loosen the handle knobs, pull outwards on each side of the lower handle, and lift the sides of 
the lower handle past the edges of the handle mounting brackets. Fold the lower handle 
forward. Make sure not to bend or kink the power cord. 

 

SERVICING 

1.

 

When servicing the mower, use only replacement parts that are available from the 
manufacturer. The use of parts that do not meet the original equipment specifications may lead 
to improper performance, and may compromise safety. 

Summary of Contents for 10679
















Reviews: