background image

 
 

 

Cordless Lawn Mower 

10679

 

Instructions for Use 

Please read and retain these instructions for future reference

 

v004: 13/06/17 

 

 

PLUG WIRING (UK & IRELAND) 

This appliance is fitted with a moulded BS 1363 13-amp plug. If you have to replace the fuse, only 
those that are ASTA or BSI approved to BS1362 and with a rated current of 5-amps should be used. 
 
If there is a fuse cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is 
lost or damaged the plug must not be used. Spare fuse holders and fuses are available from 
electrical outlets. If the socket outlets in your home or office are not suitable for this product’s plug, 
the plug must be removed and disposed of safely.  
 
Attempts to insert the plug into the wrong socket is likely to cause electric hazard. A replacement 
plug should be wired according to the following instructions: 
 

BATTERIES 

 

Keep batteries away from children and pets. 

 

Do not mix used and new batteries. 

 

Remove the batteries if left for long periods. 

 

Never dispose of batteries in a fire.  

 

Battery disposal, spent or expired batteries must be properly disposed of and recycled in 
compliance with local regulations. For detailed information, contact your local authority. 

 

Follow the battery manufacturer’s safety, usage, and disposal instructions. 

 
DISPOSAL 

 

Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with your 
local recycling regulations.  

 

At the end of the product’s lifespan please dispose of it at an authorised household WEEE 
waste recycling centre

 

  

     

 

Summary of Contents for 10679
















Reviews: