INSTRUCTIONS FOR USE
• Insert the plug into a power socket and switch on.
• Switch the Water Cooler to “ON” at the back of the unit.
• Both the blue “cold” and yellow “power” indicator lights
will illuminate indicating there is power supplied to the
unit, and that the water cooler is chilling the water.
• For best performance, and depending on the water temperature, allow approximately
30 – 40 minutes for the water to chill before use.
• When the water has reached the required temperature, the “cold” indicator light will
turn off indicating the water in the 600ml cooler tank has fully chilled.
Note:
The Water Cooler Tank has a capacity of 600ml and does not supply a continuous
stream of chilled water.
The unit needs time to chill the replacement water as it enters the cooler tank as will be
indicated by the blue Indicator Light illuminating.
Water Float
The Float is an important part of the Water Cooler. It is used to gauge the water levels
and to prevent overflow.
To ensure the Float is fitted correctly:
Float Housing
Float with Rubber Stopper
• Unscrew the Ring Nut on the bottom of the Float Housing to remove the Float.
• The Float has a rubber stopper on the tip. This rubber tip must be pointing upwards
towards the base of the water tank as shown.
• Ensure the rubber tip is seated correctly in the top of the Float and ensure it is clean
before replacing.
• Screw the Ring Nut back on to the housing. Ensure it is secure but do not over tighten.
CLEANING INSTRUCTIONS:
• Always switch off and unplug before cleaning.
•
DO NOT
immerse in water. Risk of electric shock.
• Allow to dry thoroughly before further use.
• When changing the filter it is also recommended to wash the Water Tanks and the Float
components.
• Use warm water with mild detergent to clean the Water Tanks, Float components and
lid then rinse and dry.
• To clean the Cooler unit, wipe over with a soft damp cloth and mild detergent then wipe
dry.
• Never spray the unit with liquids or submerge in water or any other liquid.
• Do not use flammable liquids, chemicals, abrasive creams, steel wool or scouring pads
for cleaning.
• Do not place parts in a dishwasher.
• The Filter will require changing every 2 - 3 months depending on use.
SPARE PARTS:
Spare Water Filters can be purchased from Coopers of Stortford.
Please quote Product Code: 10026 for Pack 3 Filters.
Please read carefully before use and retain for future reference.
3
Filter