Skyline Music System F877 Instructions for Use
Please read and retain these instructions for future reference
v001: 29/07/19
outlet.
2.
When you first plug the unit into the mains, the unit will go into standby mode. The time will be
displayed on the LCD display
3.
Turn on the unit by pressing “On/Off” button (1). If the LCD display (15) shows the time digits, it means
the power supply is normal. Now the system is ready to play music.
Setting the clock
1.
Set the unit to standby mode.
2.
Press and hold the “Mem/clock-adjust” button (9), the LCD display (15) will show 12Hours or 24 Hours
and flash. Press the Skip down
(10) or Skip up
(11) button to set 12 or 24 Hours. Press the
“Mem/clock-adjust” button (9) to confirm.
3.
The hour digit will flash on LCD display (15) Press the Skip down
(10) or Skip up
(11) button to
set the correct hour. Press the “Mem/clock-adjust” button (9) to store the hour then the minute digit
will flash.
4.
Press the Skip down
(10) or Skip up
(11) button to set the correct minutes.
5.
Press “Mem/clock-adjust” button (9) to store the correct hour.
The pre-set time will be reset completely if disconnecting the mains power supply. It is
recommended to switch the system into standby mode for convenient use.
The clock will synchronize to RDS/DAB clock once receiving the RDS/DAB signal if the clock was not set
in advance.
Listening to the radio
Operation
Manual tuning
1.
Turn on the unit by the On/Off button (1) and then press the Function button (2) until it reaches “FM”
mode.
2.
Press the Skip down
(10) or Skip up
(11) button to tune your desired station.
3.
Adjust volume up/down button (7, 8) for the desired volume level.
Auto tuning
1.
Set the unit to FM mode.
2.
Press the auto scan button (5) once; the unit will start to scan upwards until a radio station is received.
Press tuning down button (10) once and then press the auto scan button (5), the unit will scan
downwards. If the radio data system (RDS) broadcasting signal is received, the unit will set the actual
time automatically.
3.
Adjust volume knob (7, 8) for the desired volume level
FM & FM-stereo reception
The unit will default to the FM mode in Mono. Thus, if FM stereo signal received, set the FM mode to
Stereo by pressing the “Info/Play mode” button (6), then press Skip down
(10) or Skip up
(11)
button to select “Auto (Stereo)”. Press Enter button (4) to confirm.
Page 5
