Skyline Music System F877 Instructions for Use
Please read and retain these instructions for future reference
v001: 29/07/19
1)
On time setting:
Press the skip up
or down
(10, 11) to set the hour. Then press Timer
button (3) to store the timer starting hour, minute digit will flash, press skip up
or down
(10, 11) to set the minute. Then press Timer button (3) to store
the timer on time
2)
Off time setting:
After above step, the LCD will show “Timer Off” and hour digit is flashing. Press
skip up
or down
(10, 11) to set the hour. Then press Timer button (3) to
store the timer off hour, minute digit will flash, press skip up
or down
(10, 11) to set the minute. Then press Timer button (3) to store the timer off
time
3)
Wake up Mode and
Vol
Then press skip up
or down
(10, 11) to select timer on mode (CD / DAB /
FM). Then press Timer button (3) to store the timer on mode. Press skip up
or down
(10, 11) to select timer on volume level and press Timer button (3)
to complete the timer setting.
The display will show all the timer setting once again and then return to
standby mode with the timer icon “ ”.
Activate/de-activate timer function (In standby mode only)
1.
To activate timer function, press the “Timer” button once the timer indicator “ ” will appear in the
LCD display.
2.
To cancel timer function, press “Timer” button again the timer indicator “ ”will disappear.
Remark: -
1.
If there is no music source being detected (CD) when the preset time is reached, system will default to
“FM” function for wake-up mode automatically. The system will preset to the last radio frequency
being listened to before switching off.
2.
For FM/DAB wake up, the system will preset to the last radio frequency being listened too before
switching off.
3.
If wake up to buzzer is selected, the unit will emit a “beep beep” sound at the selected time.
4.
There are about 4 seconds for the alarm setting mode, this system will return to normal mode
automatically if no keys are being pressed in this time frame.
5.
During the alarm on mode, pressing the “On/off” button (1) will switch off the system.
B.
Aux-in connection
Connect the unit to other devices by connecting the Aux in jack (13) with a 3.5mm cable (not provided) and
the other end connect to the external device such as Discman/MP3 player to perform the music playback or
encoding function etc.
1)
Select the “AUX“ mode by pressing the function button (2)
2)
Adjust the Volume Up/Down button (7, 8) to desired volume level.
3)
Start to play your external device.
Page 10
