40V Cordless Lawn Mower
G543
Instructions for Use
Please read and retain these instructions for future reference
v001: 15/01/20
Page No. 14
Fig. 13
Blade Adjustment and Lubrication
WARNING:
Blades are extremely sharp, to avoid injury be careful not to touch blades when make
adjustments. Remove the battery before adjusting the blades.
Blades have been pre-adjusted prior to leaving factory, misalignment can sometimes occur; this can be
caused by blades being too loose or too tight against the cutting bar. This can cause an uneven cut or make
the mower hard to push. To correct misalignment, adjustments to the cutting bar are needed. Each end of
the cutting bar can be adjusted separately. Turn the two adjustment nuts clockwise to tighten; this moves
the cutting bar closer in towards the blade. Turn the two adjustment nuts anti-clockwise to loosen and move
the cutting bar further away from the blade.
Adjustment nut