1
2
3
5
6
7
8
9
4
10
11
12
13
14
1
3
4
2
METER BRIDGE (audio)
1. DYN/PH:
Dynamic or phantom power (48 v)
Dynamic is no power.
2. Mic/Line:
Microphone or line level in. Switching to line
automatically turns off mic power.
3. ø:
Audio phase; N = normal phase,
R = reverse phase
4. Pad:
Attenuator to reduce either mic or
line input levels
INPUT CHANNEL
1. Gain:
Mic/line preamp gain
2. HP 1:
High pass filter (see specs)
3. HP 2:
High pass filter (see specs)
4. O/L:
Near overload indicator
5. PFL:
Pre fade listen
6-9. A,B,C,D:
Channel to mix bus assigns: L (left),
R (right) indicate monitor & pan pot
assignment (center position is off)
10. LIM+LED:
The limiter is a symmetrical peak
detecting type & is completely out
of circuit when switched off.
The LED indicates limiter action.
11. Thres:
Limiter threshold: Clockwise = lower
threshold
12. Pan (switch):
Switching the pan switch to the left
disengages the panpot. Crosstalk is
therefore minimized and the output
levels will remain equal.
13. Pan (pot):
(L) = A & or C
(R) = B & or D
14. Channel fader
INPUT MODULE
MODEL CS306
1
June 2006
