Page 4
Command 81 to 84 - Option 38
This option is now active for the following faults:
AC Fail, Anti-Mask, Aux DC, Battery Load Test Fail, Battery Missing,
Comms Fail, Jamming, Keypad Ident Fail, Line Fail (internal
communicator only), Low Battery, RF Low Battery, Supervision Fail,
Telecommand Low Battery, uCom Fail, Zone AC Fail, Zone Battery
Fault, Zone Fault, Zone Low Battery and Zone Pwr O/P.
(Plug-By/Plug-On fail no longer trigger an All Fault output.)
Command 106: - Option 0
When using option 0, the control unit does not monitor the telephone line
connected to the internal communicator. The control will still report faults on a
plug-by communicator (provided the Line Fault output from the communicator
are connected to the control unit).
Command 131:
Various new reports have been added to command 131. The table below
shows the reports now available in full, with new or changed entries
underlined.
BASIC
Event SIA
Code
CID
Code
ALARM CONFIRM
BV
139
BURG BA
130
BURG RESTORE
BR
130‡
DURESS HA
121
DURESS RESTORE
HH
121‡
EXIT TIMEOUT
EA
-
EXPANDER TAMPER
TA
137
EXPANDER TAMPER RESTORE
TR
137‡
FIRE FA
110
FIRE RESTORE
FR
110‡
FORBI INTERFACE TAMPER
TA
137
FORBI INTERFACE TAMPER RESTORE
TR
137‡
FORBI LOOP TAMPER
TA
137
FORBI LOOP TAMPER RESTORE
TR
137‡
FORBI TAMPER
TA
137
FORBI TAMPER RESTORE
TR
137‡
GLOBAL TAMPER
TA
137
GLOBAL TAMPER RESTORE
TR
137‡
KEYBOX OPEN
BA
150
KEYBOX CLOSED
BR
150‡
