manualshive.com logo in svg

Cooper Bussmann BU-945U-E, User Manual, Page: 27 / 82

Share
Download
Cooper Bussmann BU-945U-E User Manual Download Page 27

www.cooperbussmann.com/BussmannWirelessResources

Cooper Bussmann Wireless Ethernet & Device Server BU-945U-E 802.11 DSSS User Manual

27

3A1582Rev1.6

For optimal security a passphrase consisting of a combination of 
letters and numbers (i.e., not just a simple word or phrase) as well as
upper and lower case. E.g., “WiReLeSs TeChNoLoGy 2010”

WPA Enterprise - Supplicant Configuration

Username / Password:

User credentials that match a valid user on

the RADIUS server.

Enable Debug:

Must only be used during commissioning and only if

requested by Cooper Bussmann Support. This must be disabled for
normal operation.

Trusted CA Certificate Upload:

Upload the certificate of the issuer of

the RADIUS server’s certificate. This enables the Supplicant to verify
the identity of the RADIUS server during the authentication process.

Certificate Verification result:

Once a certificate has been loaded,

this text box will contain validation information for the certificate. If
this text is blank or contains errors, the certificate is invalid.

Trusted CA Certificate Contents:

Displays the contents of the loaded

certificate.

WPA Enterprise - Authenticator Configuration

RADIUS Server IP Address/Port/shared secret:

Connection 

information for the RADIUS Authentication Server.

Supplicant Re-authenticate Period:

Sets the maximum time at

which the Supplicant must re-authenticate. This parameter determines
maximum time a client will still have access to the network after its
user credentials have been revoked.

Enable Debug:

Must only be used during commissioning and only if

requested by Cooper Bussmann Support. This must be disabled for
normal operation.

Summary of Contents for BU-945U-E



















































































Reviews:

No comments