3
Important Safety Instructions
WARNING
: Limitations on Use –
The
Cooper Bussmann Inverter
is not to be connected
to life support devices.
CAUTION
: Risk of injury –
To avoid risk of injury, use only 12Vdc, lead-acid, rechargeable
batteries (i.e. GEL, AGM, and Flooded). Other types of batteries may burst, resulting in personal
injury and/or damage.
Do not expose inverter to rain, snow, spray, or water.
Do not cover/obstruct ventilation systems.
Use wire in good condition and of appropriate ratings.
Attachments not recommended by Cooper Bussmann may be damaging to inverter.
Do not use inverter after being dropped, hit, or damaged.
Do not disassemble the inverter. Risk of shock, fire, and void of warranty may result.
Remove all AC and DC connections before maintenance, cleaning, or circuit work.
Provide inverter an equipment-grounding conductor connected to AC input ground.
Insure cables are routed properly, secured and protected from chaffing.
WARNING
: Explosion hazard –
Working with batteries can be very dangerous. It is
crucial to follow all steps completely while servicing the unit. It is possible for the inverter to
produce arcs and/or sparks, do not install or use inverter near flammable materials (i.e. gas-
powered machines, fuel tanks, or any components connected to a fuel supply). Follow any
instructions from the battery manufacturer being used.
Personal Precautions When Working with Batteries
WARNING
: risk of electrical shock, burn from high short-circuit current, fire
or explosion from vented gases.
Follow the instructions and precautions from the battery manufacturer (i.e. cap removal,
or charging rates).
Follow battery instructions for water and battery acid levels from the battery
manufacturer.
Ventilate the area near the batteries as much as possible.
Do not smoke or produce flame/spark near engine or batteries.
Use caution when handling tools around batteries.
Remove all metal items (i.e. rings, bracelets, watches) from person when working with
batteries.
Work within voice range of other people.
Wear eye and clothing protection while working, and avoid touching eyes during
installation.
Upon battery acid contacting skin or clothing, wash immediately with soap and water.
Upon contacting eye(s), flood immediately with running cold water for at least twenty
minutes and seek medical attention.
