Cooper & Hunter CH-S09FTX5, Owner'S Manual

Page: 15 / 128

Wiring connections
Connect the cable to the indoor unit
1. Indoor/Outdoor connection cable should be H07RN-F type.
2. Lift the indoor unit panel up and remove the screw, then remove the window cover
3. Connect cables according to their marks to terminals.
4. Wrap those cables not connected with terminals with insulation tapes, so that they will
not touch any electrical components.
Front panel Terminal
Indoor unit
Connect the cable to the outdoor unit
1. Remove the electric parts cover from the outdoor unit.
2. Connect the connective cables to the terminals as identified with their respective
matched numbers on the terminal block of indoor and outdoor units.
2. Power supply connection cable should be H07RN-F.
3. To prevent the ingress of water, from a loop of the connective cable as illustrated in
the installation diagram of indoor and outdoor units.
4. Insulate unused cords (conductors) with PVC-tape. Process them so they do not
touch any electrical or metal parts.
Access door terminal
Outdoor unit
Wires specifications
Model (W)
Power connecting cable Indoor - outdoor connecting cable
Main power
supply
Air switch capacity
(A)
Section Section
2600 W, 3500 W 3 x 1.5 mm² 4 x 0,75 mm² To outdoor 20 A (240V)
5300 W, 7000 W 3 x 1.5 mm² 4 x 0,75 mm² To outdoor 25 A (240V)
Wiring diagrams
Mod. 2600 W, 3500 W Mod. 5300 W, 7000 W
OUTDOOR UNIT
TERMINAL BLOCK
POWER SUPPLY
L N
INDOOR UNIT
TERMINAL BLOCK
BU
BU
BK
BK
BN
BN
OUTDOOR UNIT
TERMINAL BLOCK
POWER SUPPLY
L N
INDOOR UNIT
TERMINAL BLOCK
BU
BU
BK
BK
BN
BN
1
3