13
Changing the oven lamp
Wait for the oven to cool.
Unscrew and remove the diffuser. Unscrew the lamp from the lampholder. Replace lamp and diffuser
(Figure 14).
The replacement lamp must be of the same type, voltage and wattage (15W SES 300°C).
LAMP
LAMPHOLDER
DIFFUSER
Figure 14 - Changing the lamp
Cleaning the glass door
Ensure the oven door is cool before cleaning.
Removal of the door makes it easier to clean the door, the door surround and the seals.
Removing the oven door
1.
Open the door fully.
2.
Insert the pins (supplied) into the pin-holes, on both hinges.
(Figure 13).
3.
Push up the latches with a screwdriver. (Figure 13).
4.
Lift the door slightly as if closing, then with both hands
supporting the door, pull the door upwards and then away
from the oven.
5.
Clean the glass part of the oven door with hot water and a
soft cloth.
6.
Wipe the rubber seals with a soft cloth taking care not to
damage them.
Replacing the oven door
1.
Push up the latches with a screwdriver and place the hinges
into the hinge holes.
2.
Support the oven door and push down the latches with a
screwdriver.
3.
Remove the pins from the hinges.
4.
Open and close the door to ensure it has been fitted correctly.
Figure 13 - Removing the oven door
PIN
LATCH
SCREW-
DRIVER
HINGE