10
The hotplates
The hotplate power is regulated with a 3 position temperature selector knob. The
control allows for the efficient transfer of heat to the cooking pan (Figure 9).
The selector knob can be turned in both directions:
• Anti-clockwise to increase heat
• Clockwise to decrease heat
There are numbers
G
to 3 marked on the knobs (Figure 9). These numbers
correspond to the heat setting of the hotplate.
• 3 is the highest setting
•
G
is OFF.
Using the grill
PLEASE NOTE: It is important to close the oven door when using the grill.
Move the shelf to the first or second position from the top.
Figure 10 - Fitting the handle
EDGE
HANDLE
WIRE RACK
Use this function for grilling or top oven heat which is suitable for browning food.
Turn the thermostat control between 75°C and MAX and preheat the element for five minutes.
Place the food in the middle of the grill pan and position the pan so the food is near but not touching the
top element.
Do not line the grill pan with aluminium foil or wrap food items with foil before placing under the grill.
Aluminium foil has a high reflectivity which can damage grill elements.
When fitting the handle, hook the handle over the edge of the grill pan and through the wire rack at a
central point along the grill pan edge, (Figure 10). Lower the handle fully down to fit.
Select
on the function selector.
Figure 9 - selector knob