![background image](http://html1.mh-extra.com/html/coolworks/mweuk-10crn1-bcl0/mweuk-10crn1-bcl0_instruction-manual_2661389009.webp)
9
screws through frame holes into window sash (Fig.8).
Fig.8
C. To secure lower sash in place, attach right angle
shown (Fig.9).
Fig.9
D. Cut
and insert it in the
space between the upper and lower sashes (Fig.10).
window sash seal foam
Fig.10
FOAM SEAL
INSTALL R1 INSULATION PANEL (only be
applicable to ENERGY STAR models)
6
In order to minimize air leaks and ensure optimal
insulation, it is necessary to install the included R1
insulation panel to the side curtain. Follow the instructions
below.
Step 1. After the unit is installed to the window,
measure the inner width of the side curtain as shown
(Fig.11).
Measure
the
inner
width
of
the
side
curtain
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1
2
3
4
5
6
Fig.11
or
Fig.12
Step 3. Slide the cut R1 insulation panel into the side
curtain (Fig.13).
Step 4. Repeat on the other side.
Fig.13
B. Drive 3/4 or 1/2" (19 or 12.7 mm) locking
sash lock with 3/4 or 1/2" (19 or 12.7 mm) screw as
Step 2. Mark a line on the provided R1 insulation
panel according to a length 1/8'' (3mm) less than the
measured width in step 1, then cut the R1 insulation
panel along the line.
INSTALLATION INSTRUCTIONS
Summary of Contents for MWEUK-10CRN1-BCL0
