background image

3

IMPORTANT SAFETY INSTRUCTIONS

Inside you will find many helpful hints on how to use and maintain your air conditioner

properly. Just a little preventive care on your part can save you a great deal of time 

and money over the life of your air conditioner. You'll find many answers to common 

problems in the chart of troubleshooting tips. If you review our chart of Troubleshooting 

Tips first, you may not need to call for service at all.

   

To prevent injury to the user or other people, or property damage, the following 
instructions must be followed. Incorrect operation due to ignoring instructions may 
cause harm or damage. The seriousness is classified by the following indications.

This symbol indicates the possibility of death or serious injury.

Always do this.

Never do this.

CAUTION

This symbol indicates the possibility of injury or damage to property.

WARNING

WARNING

Plug in power plug 

properly.

Do not modify power cord length or share the 

outlet with other appliances. 

Always ensure effective

grounding.

Unplug the unit if strange

sounds, smell, or smoke

comes from it.

Keep firearms away.

Ventilate room before operating air conditioner if there is 

a gas leakage from another appliance.

   Otherwise, it may cause electric

   shock or fire due to excess heat 

   generation.

  It may cause electric shock or fire due to heat generation.

  Incorrect grounding may cause 

  electric shock.

  It may cause fire and electric

  shock.

  It may cause fire.

  It may cause explosion, fire, and burns.

  It may cause electric shock or fire

  due to heat generation.

  It may cause electric shock.

  It may cause failure of machine

  or electric shock.

  It may cause fire and electric 

  shock.

  It may cause fire and electric 

  shock.

  It may cause electric shock or fire.

  If the power cord is damaged, it must be replaced by the 

  manufacturer or an authorised service centre or a  

  similarly-qualified person in order to avoid a hazard.

  This could damage your health.

  Incorrect installation may cause 

  fire and electric shock.

  It may cause electric shock.

   It may cause an explosion or fire.

  It may cause failure and electric shock.

Do not operate or stop the

unit by inserting or pulling 

out the power plug.

Do not operate with wet

hands or in damp 

environment.

Do not allow water to run

into electric parts.

Do not use the socket if it is

loose or damaged.

Do not use the power cord

close to heating appliances.

Do not damage or use an unspecified power 

cord.

Do not direct airflow directly on room 

occupants.

Always install circuit 

breaker and a dedicated

power circuit.

Do not open the unit during operation.

Do not use the power cord near flammable gas 

or combustibles, such as gasoline, benzene, 

thinner, etc.

Do not disassemble or modify unit.

!

!

!

!

!

!

!

    READ THIS MANUAL

Summary of Contents for MWEUK-10CRN1-BCL0


























Reviews: