Coolworks MWEUK-10CRN1-BCL0, Instruction Manual

Page: 18 / 25

NOTE:
Function buttons
Push this button to
decrease the indoor
temperature setting in
1ºC/1ºF increments to
17ºC/62ºF.
Push this button to activate
the "Auto Start" or "Auto
Stop"program.
Push this button to increase
the temperature setting
in 1
º
C/1
º
F increments to
30
º
C/86
º
F
Press this button to activate
the Sleep mode. This function
is available on COOL, HEAT
or AUTO mode only and
maintain the most comfortable
temperature for you.
Press this button to activate
the Energy-saving mode.
Press it again to stop the
funtion.(on some models)
Operation starts when this button
is pressed and stops when the
button is pressed again.
NOTE: If the unit has ENERGY
SAVER function, it will initiate
automatically the Energy Saver
function under Cool, Dry, and
Auto(only Auto-Cooling and
Auto-Fan) modes.
Press this button to select the
desired operation mode from
AUTO, COOL, DRY, HEAT
(Cooling & heating models
only) and FAN.
Do not select HEAT
mode if the machine you
purchased is cooling only type.
Heat mode is not supported by
the cooling only appliance.
Push this button, the system
will automatically shift to COOL
operation with auto fan speed,
the setting temperature is
26ºC/80ºF. And the timer setting
program will be cancelled.
Used to select the fan speed
in four steps: Auto, Low,
Med and High.
ON/OFF button
MODE button
TEMP DOWN button
TEMP UP button
FAN button
TIMER button
SLEEP button
ENERGY SAVER button
ONE TOUCH button
NOTE:
Remote Controller Instructions