UMD V3 Installation Manual - Remote Control
13 November 2018
Page
19
of
39
Door Tag Installation Considerations:
Tag Alignment with the Magnet:
On the side of the door tag is a label “Magnet This Side”, make sure that the door tag is installed with this side
of the tag facing the magnet.
Please Note: The magnet should be vertically aligned mid-way with the side of the door tag where possible
–
this may require packing the magnet up.
Distance between the Door Tag and the Magnet:
Install the door tag with a maximum of 12mm between the tag and the magnet to ensure consistent
communication.
Please Note: Make sure that the Door Tag is switched on by holding down the on/off button on the tag and
checking that the green On LED flashes to indicate an On State.
