2. Installation
Fanless no noise design
Painted Aluminum Enclosure
Passive Power Factor Correction(Optional)
Surge Current Protection
Input Transient Voltage Protection
Over Voltage Protection
Over Power Protection
Short Circuit Protection
1. Function Description
Here are some of the key features:
1
This power supply is designed for personal computer. There are six DCoutputs:
+5V, -5V, +12V, -12V, +3.3V +5V , and it provides power to all computer
＆
SB
systems and peripherals with maximum protection.
This power supply family is designed w/o cooling fan therefore results in
complete silence. Heat generated and raised in the power supply unit is
conducted via heatsink and finally release to the air.
It is rather simple to install this power supply to your precious computertower.
Follow the steps below to finish the installation.
Step1: Open the computer tower cover; put the power supply into the corresponding
location of the tower, and then use right screws to fix the power supply
Step2: Put the Main Power Connector, ATX12V Connector, S-ATAonnector,
Peripheral Connectors and Floppy Connectors to the corresponding
male connectors of main-board, peripheral devices (i.e. HDD, CDROM
etc.) and floppy drivers respectively. When you connect connectors, please
pay attention to the orientation of them because of the different hole sizes.
Find the proper orientation and push down firmly making sure that the
pins are aligned.
to tower.
Summary of Contents for CF-300
Page 1: ...Table of Content ...
