16
11.10 How to use ArcSoft VideoImpression™ 1.5
Lets make a video!
Follow these basic steps to make your rst video.
Step 1 Click on new Icon.
Step 2 Using the
selector button select video templates.
Step 3 Double click on the Static.avi screen in the video template selection and a copy will appear in the rst large frame
on the storyboard on the bottom.
Step 4 Double click on the small frame directly right of the large frame. A new template will appear at the top called
“special effects” Double click on the “1. Fire” special effect which will now drop into the special effect frame you
highlighted.
Step 5 Double click on the next right large frame and repeat step 3 using a video template and double click template 5.
Countdown.avi. Repeat step 4.
Adding an existing video.
Step 6 To add a video you have already made double click on the next large frame in the story board to the right. Click on
the “Get” icon and select a video you had made and led in the folder called “album” click on Get, with the selector
click on the down arrow and select desktop and then double click on “Album” folder and select a le ending with
mov (video le) the video will appear in the video templates. Double click on the video and it will appear just like
other video templates in the storyboard. Now go to step 10.
Alternatively you can produce a live video.
Ensure your
Stylus 1000
is connected to the computer via the USB cable. Click on the capture icon.
Step 7 And press the
record icon. Wait for the video link to go live and now you’re recording, press the ESC key on
your keyboard to end the video.
Step 8 Press the “Save” icon and name your le, and then press “save”. Video impression will ask you where you want to
place your video. Select “video template”.
Step 9 Select the “album” icon and your video clip you have just produced will appear in the video templates. Double click
on your video, your video will now drop into the storyboard.
Running the video.
Step 10 Select the “play movie” icon
which will assemble your video together. Press the
play icon to watch your
completed video. Watch to see how the special effects merge between the frames on the story board. Now you try
to make your own and also try the audio template.
11.11 How to use CU-SeeMe™
Warning!
Using CU-SeeMe™ will erase all images stored in your
Stylus 1000
. Make sure you upload all wanted images before using
CU-SeeMe™.
1. Connect your
Stylus 1000
to the USB cable on one end.
2. Connect your USB cable to an available USB port on your Mac on the other end.
3. Put your
Stylus 1000
next to your Mac monitor or another at surface.
4. Connect your microphone (not included) to your audio card’s external microphone connector.
5. Double click the “CU-SeeMe™” icon from the CU-SeeMe™ folder.
6. Go to “Edit” and then “Preference”. Edit your settings, e.g. video title, connection settings, etc.
7. Go to “Conference” and click “Connect”. Type in the Hostname and IP address for the person you want to call and press
“Connect”.
8. To nd your own IP address, go to “Control Panel” and then “File Sharing”. You will be able to see your IP address under
the “Start/Stop” partition.
9. For further help on how to use CU-SeeMe™, you can visit the following website: http://www.cuseeme.com
11.12 How to use Adobe® Acrobat® Reader
Adobe® Acrobat® Reader enables you to view document in.pdf format
For more details go to www.adobe.com/acrobat
Static .avi
countdown .avi
1. Fire
1. Fire
Storyboard
