Cool Compact BR95, Translation Of The Operating Instructions

Page: 13 / 32

13
3. OPERATION
3.1 Electronic controller
The control elements are fixed at the left side in the installation compartment
panel. (See hereto picture 1)
Switch on:
Press on-/off-switch of the electronic control for approx. 2 sec.
Switch lights-up – refrigeration counter / saladette is ready for operation.
Temperature control:
The desired temperature can be set by the electronic controller (see hereto
picture: 2 electronic controller on page 14. In case none of these buttons are
pressed, the digital display shows the current value (room temperature).
When pushing button “SET” the rated value is displayed and you may check if the
right temperature is set.
If you now wish to adjust the rated value, push button “SET” first, than set the
desired value by button “UP” or “DOWN”. This rated value is adjustable within the
factory given limits only.
In case of power failure or as the case may be device switch off, the pre-set
values are kept.
Picture 1
11-014-522-01
without tools
demountable
display panel with
electronic controller (fixtures)
nameplate
condenser
(clean here)
condensate
discharge
compressor
GB