Manual ISW06x 14161_A USINTL
2
Before operating your induction soup well, do the following:
•
Remove all packing material and save for subsequent shipment or in case of
concealed shipping damage.
• Keep unit away from other heat sources and allow at least 2” (51 mm) between all
sides of the housing and any surface or obstacle, and 6” (152 mm) between the
bottom of the housing and any surface or obstacle. If either the air intake or exhaust
outlet is blocked, the internal temperature will rise, causing an error code to occur.
Grounding Instructions:
The soup well must be properly grounded. In the event of an electrical short circuit,
grounding reduces the risk of electric shock by providing a safe path for the electric
current. The soup well has a power cord with a 3-prong grounding plug, which must
be used in a compatible and properly grounded outlet. It is the owner’s responsibility
to replace any 2-prong wall outlet with a properly grounded 3-prong wall receptacle.
For your safety, never cut, remove, or disable the electrical (ground) connection from
the plug. Never use an adapter plug or an extension cord with the soup well.
WARNING: Electric shock can result from an improperly grounded plug. Please
consult a qualified electrician if you have any questions about these grounding
instructions.
Before you begin:
Please make sure that this power cord is firmly attached to your CookTek unit
BEFORE plugging the unit into the power receptacle and before attempting operation.
Every installation site has different electrical wiring. Because many different local
codes exist, it is the Owner and Installer’s responsibility to comply with those codes.
CookTek is not responsible for any consequential damages as a result of failure to
comply with installation requirements.
• Read all installation instructions carefully before starting installation.
• Remove soup well carefully from carton.
•
Remove all loose packaging and accessories and save for subsequent shipment or
in case of concealed shipping damage.
• It is the responsibility of the installer to comply with all federal, state and local
codes.
• Any installation not matching the specifications discussed in this manual
automatically voids the product’s warranty.
•
Insert unit into counter top cutout.
•
Plug one end of the control cable into the unit and thread the cable through the
cutout for the control box.
•
Plug the other end of the control cable into the control box and mount the control
box with four screws in the desired location.
PREPARING YOUR COOKTEK INDUCTION SOUP WELL UNIT FOR USE
ELECTRICAL INSTALLATION REQUIREMENTS
MECHANICAL INSTALLATION
