37
Handling and fixing the oven
Connect to mains power supply ensuring the cable is not bent.
Lift oven into housing unit using the foreseen handles at the sides of the
appliance, do not lift the oven with the door handle otherwise the glass door might
shatter.
Note: If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Once the oven has been lifted into place inside the housing unit, use the two
holes located within the sides of the metal casing of the oven to secure it.
Secure with 2x screws [06] and cover with 2x plastic covers [07].
Also ensure that you adjust the furniture doors adjacent to the sides of the oven
so there is a 4 - 6 mm gap between them, otherwise heat displaced from the oven
might damage the furniture door.
The appliance is now ready to use.
03
04
[07] x 2
[06]
x 2
CLPYRO23-C&L-A5-GB-IM-V08-141107.indd 37
11/7/14 2:54 PM
