34
Figure above shows the air circulation requirements including a slot that should be
cut into the plinth if fitted.
It is essential when installing your oven there is adequate air circulation around
the appliance to ensure the correct operation of the appliance. Inadequate air
circulation will greatly impair the performance of the appliance and can affect
adjacent cabinets due to the rise in temperature. The panels of the kitchen unit
that are next to the oven must be made of a heat resistant material. Ensure that
the glues of units that are made of veneered wood can withstand temperatures of
at least 120ºC. Remove the back of the kitchen unit to ensure an adequate current
of air circulates around the oven.The rear gap should measure at least 45 mm.
02
2mm
10mm
min. 200cm
min. 10cm
min. 45mm at rear
Upper vent
Ensuring sufficient ventilation
CLPYRO23-C&L-A5-GB-IM-V08-141107.indd 34
11/7/14 2:54 PM
