20
Care and Maintenance
Removing oven parts for cleaning
• To remove the door, open the door to the maximum angle. Then pull the buckle at the door hinge backward.
• Close the door to an angle approximately 30°. Hold the door with one hand on each side. Lift up and slowly pull the door
out from the oven.
1
2
• The inner door glass panel can be removed for cleaning but it must be replaced the right way up. The silkscreen on the
glass must face inwards.
• Always make sure that the glass is pushed fully into the stop position.
• To remove the glass panel, open the door wide, push the clips on the left and right sides of door bracket. Then remove
the plastic top cover. Hold the glass and slide it out along the door bracket.
1
2
WARNING: Do not operate the appliance without the glass panel correctly fitted.
• For your safety, glass door panels are made of toughened glass. This ensures that, in the unlikely event that a panel
breaks, it does so into small fragments to minimize the risk of injury. Please take care when handling, using or cleaning
all glass panels, as any damage to the surfaces or edges may result in the glass breaking without warning or apparent
cause at a later date. Should any glass panel be damaged, we strongly recommend that it is replaced immediately and
please contact Customer Services, as shown on the last page.
5059340094113-C&L-A4-IM-Easy-V10.indd 20
5059340094113-C&L-A4-IM-Easy-V10.indd 20
29/10/2020 3:20 PM
29/10/2020 3:20 PM
