14
Use
Setting the Cooking duration and End times - Main oven only
These functions can be used to program the cooking times in the Main oven so that cooking finishes as required and the
oven switches off the power automatically.
Cooking duration can be set for a finite length of time. Additionally, the End time can be set so that the Cooking duration
then finishes at the time you need.
You can select the temperature and oven function before or after you program Cooking duration and End time.
Important: if you turn the oven on first, then once the program has been set, the oven will then switch off and wait in
Standby mode until the start time. If turned on after programming, the oven enters Standby automatically.
Cooking duration
• Press the Function button twice to access the Cooking duration and the icon
will flash with”0:00” shown in the
display.
• Press the “+” or “-” buttons to set the Cooking duration time. Holding each button will scroll quickly through the set time.
• Once the time is set, the icon will stop flashing and the Cooking duration time is set.
• The Cooking duration range is from 0:01-23:59 and after countdown “0:00” will be displayed.
• The oven will switch off the power and beep every few seconds for two minutes before stopping; alternatively press any
button to finish the alert early.
• To check or alter the programmed time, press the Function button as before.
Example settings:
Current time: 15:30
Required Cooking duration: 1:00
Required End time: 16:30
• Program the Cooking duration at 1:00.
• Choose the cooking mode and set the temperature.
• Place the food in the oven and close the door.
• The oven starts to cook for one hour and turns itself off at 16:30.
End time
• Press the Function button three times to access the End time and the icon
will flash with the current time shown in
the display.
• Press the “+” or “-” buttons to set the End time. Holding each button will scroll quickly through the set time.
• Once the time is set, the icon will stop flashing and the End time is set.
• The End time cannot be set longer than 23:59.
• The oven will switch off the power and beep every few seconds for two minutes before stopping; alternatively press any
button to finish the alert early.
• To check or alter the programmed time, press the Function button as before.
Example settings:
Current time: 14:30
Required Cooking duration: 2:00
Required End time: 17:30
• Program the Cooking duration at 2:00.
• Program the End time for 17:30.
• Choose the cooking mode and set the temperature.
• Place the food in the oven and close the door.
• The oven enters Standby mode and will turn itself on in an hour at 15:30, cook for two hours and turn itself off at 17:30.
Note:
1. If the master Clock is altered when the Alarm, Cooking duration or End time are set, these programs will be cancelled.
2. If all three programs are set together, only the Alarm time will be displayed.
3. The programmed times can be checked or altered by pressing the Function button the required number of times.
5059340094113-C&L-A4-IM-Easy-V10.indd 14
5059340094113-C&L-A4-IM-Easy-V10.indd 14
29/10/2020 3:20 PM
29/10/2020 3:20 PM
