manualshive.com logo in svg

Conway MT 2018, User Manual

Share
Download
Conway MT 2018 User Manual Download Page 74

74

Other components

9.7.2.1 

Quick-release on the seat post

 WaRninG

Risk of falling if the quick-release lever on the seat post 

is left open.

Risk of accident and injury!

•  Before each ride, check that the quick-release lever 

on the seat post is closed with a sufficient amount of 

pretension.

 noTiCe

Incorrect opening of the quick-release lever.

Risk of damage!

•  Hold on to the saddle when opening the quick-release 

lever.

9.7.2.2 

opening the quick-release

•  Turn the quick-release lever outwards 

(see 

Fig. “Quick-release lever”

, right).

9.7.2.3 

Closing the quick-release

•  Turn the quick-release lever inwards until it is flush against 

the seat post.
• 

If the seat post is not secure, adjust the quick-release 

(see Chapter 

“Settings” on page 75

).

Fig.: Quick-release lever

1  Closed

2  Open

1

2

9.7.2.4 

Quick-release axles

9.7.2.5 

opening the quick-release axle

•  Turn the quick-release lever outwards 

(see 

Fig. “Quick-release axle”

).

9.7.2.6 

Closing the quick-release axle

1.  Turn the axle nut clockwise until the quick-release lever can 

only be closed with an increased amount of force.

2.  Turn the quick-release lever inwards until it is flush against 

the fork.
• 

If the quick-release axle or wheel is not securely 

tightened, adjust the quick-release axle 

(see Chapter 

“Settings” on page 75

).

Summary of Contents for MT 2018





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands