Conway MT 2018, User Manual

Page: 67 / 100

67
Other components
Fig.: Seat post clamp
1 Quick-release
2 Seat post 3 Screw
2
3
1
2. Adjust the saddle height so that you can sit on it comfortably.
3.
Make sure that the marking on the seat post is not visible
(see Fig. “Minimum insertion depth” ).
4. Rotate the saddle so that it forms a straight line with the
frame, when viewed from above.
Fig.: Minimum insertion depth
1 Seat post clamp 2 Marking
1 2
5. Close the quick-release until it is flush with the seat post,
or tighten the screw on the seat post clamp in clockwise
direction, taking the torques into account.
6. Check that the seat post is securely tightened. To do this,
sit on the saddle and rock backwards and forwards.
7. Check if you can rotate your saddle.
• If you can rotate the seat, adjust it using quick-release
(see Chapter “Settings” on page 75 ).
note:
Depending on the bicycle model, your bicycle is fitted with
a seat post that can be adjusted in height (see Chapter “Saddle
position” on page 68 ).
The seat post has an adjustment range of 100 mm.
1. To adjust the saddle
height, push the button on
the handlebars inwards.
2. Once the button is
depressed, pull the saddle
up or push it down as
needed.
3. Let go of the button.
4. If the range of movement is
not sufficient for the required
adjustment, you can adjust the
seat post to alter the saddle height.
Fig.: Handlebar controls
1 Button
1