Conway MT 2018, User Manual

Page: 63 / 100

63
Other components
note:
Specialist expertise and tools are required to correctly
adjust the handlebar height of a threadless handlebar stem.
Ask your specialist dealer to adjust the handlebar height.
9.1.3.3 Quill handlebar stem
WaRninG
Breakage of the quill handlebar stem caused by incorrect
set up.
Risk of accident and injury!
• If you adjust the handlebar height yourself, you should
observe the minimum insertion depth for the quill
handlebar stem.
1. Remove the cap on the top of the quill stem in an upwards
direction (see Fig. “Handlebar stems” , right).
2. Unscrew the internal screw with 1 to 2 turns in an anti-clockwise
direction.
3. Take hold of the handlebars and push the quill stem up or
down until it is in the desired position.
• Only push the quill handlebar stem so far up that it is
still not possible to see the markings on the quill stem
(see
Fig. “Quill handlebar stem”
).
Fig.: Quill handlebar stem
1 Marking
1
Fig.: Handlebar direction
4. Turn the interior screw in a clockwise direction, while still
taking the torques into consideration.
5. Replace the cap on the quill handlebar stem.