Manual CC 6357
20
1. When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow
indicates MOTION DET .
2. Set up the mode using the 4 direction buttons.
- SENSITIVITY: You can select up to 8 MD areas. When SENSITIVITY number is high, motion detection
sensitivity is increased to recognize even small movement.
- AREA MODE: Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS: Determines which of the 4 vertices of each MD area is to be used.
- YPOS: Determines the coordinate of the vertical axis for SEL POS.
- XPOS: Determines the coordinate of the horizontal axis for SEL POS.
- FILL
→
SET: Fills in a selected MD area. Fills in a selected MD area. The colour of filling is sequentially
selected as brown, orange, blue, cyan, yellowish green, yellow and red.
- RETURN: Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
Note
• MD areas show only MOTION DET menu. Therefore, MD areas don’t display on the monitor screen.
●
PRIVACY: Hide an area you want to hide on the screen.
When the SPECIAL menu screen is
displayed, press the Up and Down buttons so that the arrow indicates ‘PRIVACY’.
Set up the mode using the 4 direction buttons.
- AREA SEL: You can select up to 8 areas.
- AREA MODE:
Determines whether to use the area selected in the AREA SEL, and the size and position of
the area.
- MASK COLOR: Determine area colour. You can select Gray, Green, Red,
Blue, Black, White.
- TRANSP: Determine the transparency of selected area as controlling number from 0 to 3.
- RETURN: Select this to save the PRIVACY menu settings and return to the SPECIAL
menu.
●
DIS (Digital Image Stabilizer):
This function mitigates any picture movement due to external factors such as wind.
●
COMM ADJ (Communication Adjustment):
This function sets up the camera communication status when controlling the camera through an external
control device.
1. When the SPECIAL menu screen is displayed, press the Up and Down buttons so that the arrow
indicates ‘COMM ADJ’.
2. Set up the mode using the 4 direction buttons.
- CAM ID: Determines the camera's identification number (between 0 and 255).
- BAUD RATE: You can select 2400/4800/9600/19200/38400/57600 bps.
- UART MODE: You can select NONE, EVEN or ODD for the parity bits.
- RET PKT: Determines whether to send a command back to the controller device when a
communication control command is sent to the camera.
