Manual CC 6357
10
1. Base Housing Mounting
- Open the dome cover by loosening the 3 security screws using the special L wrench provided.
- Mount the base of camera to a sturdy surface using the 3 screws
(1.5 inch) and the 3 premade holes on the base of the dome.
2. Power Connect & Monitor Impedance
- DC12V/500mA regulated power supply
- To avoid fire or shock hazards, only use a CE listed power supply.
3. Camera Module Adjustment
- Loosen the screws on the 3-axis camera bracket and adjust the direction and angle of view.
- Make sure to retighten the camera bracket screws.
- Set all desired functions using the OSD menu.
4. Dome Cover Mounting
- Replace the dome cover on the base and tighten the 3 security screws.
How to Use the Camera
Menu
Setup menu
Lens (selection)
Manual DC
Exposure
Shutter AGC Sens-Up Return
White Balance
ATW AWC Manual
Outdoor Indoor
Backlight
OFF HLC BLC
DNR (Digital Noise Reduction)
ON OFF
Day & Night
Color B/W Auto Extern
Image Adjustment
Freeze V-REV H-REV
D-Zoom Sharpness Return
Special
Camera Titel Motion Det
SYNC DIS
Privacy Comm Adj
Language Reset
Return
Exit
