Manual CC 5201
10
Installation Procedure
Lens
The lens is not supplied with this camera. Purchase a lens suitable for the environment. This camera
accepts an auto iris lens and both C-and CS-mount lenses.
Note
It is recommended to use the DC type Auto Iris Lens to effectively enjoy the major functions of this
camera.
Keep the lens surface clean, as the picture quality suffers if there is dirt or fingerprints on the Lens.
Using an Auto Iris Lens
1.
Strip 8mm of insulation from the end of the Auto Iris Lens cable.
2.
Strip 2mm of insulation fro each of the cores of the cable.
3.
Remove the cover of the Auto Iris Lens connector plug and solder the lens cable to the
connector pins of the plug.
For a Video Drive Lens
For a DC Drive Lens
Pin 1: Red (Power)
Pin 1: Damping –
Pin 2: NC
Pin 2: D
Pin 3: White (Video Signal)
Pin3: Drive +
Pin 4: Black (Ground)
Pin4: Drive –
