Conviron GEN1000-GE, Operator'S Manual

Page: 9 / 54

November 8 2019 | 291180-ENG R00 1
1
PRECAUTIONS
The equipment is intended to be installed, operated, maintained, and only serviced by trained
personnel, according to the instructions and precautions described in the manuals provided by
Conviron.
Table 1-1 lists precautions intended to help guide users in the safe operation of Conviron
chambers.
1.1 Hazard Identification Symbols
Table 1-1 Hazard Identification Symbols
Symbol Description
Th
e ″
HAZARD WARNING
″ symbol is used whenever a general hazard exists
which could cause personal injury or potential equipment damage, and requires
correct procedures/practices for prevention.
The ″
IMPORTANT INFORMATION
″ symbol is used to identify operating
procedures which must be followed to ensure smooth and efficient equipment
operation.
T
he ″
ELECTRICAL SHOCK/ELECTROCUTION
″ symbol is used to identify a
source of potentially dangerous electrical current.
The ″
BURN HAZARD/HOT SURFACE
″ symbol is used to identify surfaces which
are hot enough to cause personal injury.
The ″
SLIP HAZARD
″ symbol is used to identify a potential hazard of falling from
elevated surfaces.
The ″
PROTECTIVE EARTH-GROUND
″ symbol is used to identify the protective
earth connection.
The ″
OPTICAL RADIATION
″ symbol is used to identify areas where exposure to
ultraviolet (UV) and infrared radiation may be possible.
The ″
DISCONNECT MAINS POWER
″
symbol is used remind service personnel
to disconnect the power at the mains panel before servicing this equipment.