Conviron GEN1000-GE, Operator'S Manual

Page: 13 / 54

November 8 2019 | 291180-ENG R00 5
2
CHAMBER FEATURES
2.1 Control System
The control system provides advanced programming capabilities, allowing ramping or stepping
of environmental co
nditions to match research requirements. User programmable ″set and
fo
rget″ alarms track the operation of the chamber relative to user-defined set points. Visual and
audible notifications provide a further level of protection. For remote monitoring and control, the
chamber comes ready to communicate with
Conviron’s Central Management™ or CMP-Link.
Refer to the included
Conviron CMP6060 Operator’s Manual
for complete instructions.
2.2 Air Intake and Exhaust
The chamber includes manually adjustable fresh air intake and exhaust ports to provide
chamber air exchanges. Exhaust air flows to ambient with no additional connection required.
2.3 Humidity Control
Additive humidity is controlled through the use of an ultrasonic humidifier. Based on +21°C
(70°F) and 50% RH ambient conditions, a range of up to 98% RH, limited by a +25°C (77°F)
dew point.
2.4 Instrumentation Ports
One 2
″ (50mm) access port with a light-tight cap is provided on the right side of the chamber.
The port allows small instruments and monitor leads to be inserted into the chamber without
opening the front door, and without significantly changing the environment within the chamber.
2.5 Network Connectivity
An RJ45 connection port provides connection to the facility network.
2.6 Levelers
The unit is supplied with levelers to stabilize the chamber in its final location and compensate for
variations in the finished floor.
The stated humidity range is for an empty chamber. The chamber may achieve higher
humidity levels with plant loading.