Conviron CMP4030 User Manual Download Page 78

Page: 78 / 93

App. B-3

Solution

1. Verify Start/Stop switch set to ON.
2. Check ITSO limits.
Will not appear if SUDLY is off

•

Alarm limit shut down – alarm for limit raised.

•

Program stopped – no alarm message

Alarm code

Circulation fan failure (if equipped with monitoring)

Description

The chamber circulation fans have stopped unexpectedly.

Defaults

•

priority: 20

•

delay: 30 seconds

•

persistent

•

User Interaction Level: not accessible

Cause

Probable circulation fan problem

Solution

Repair circulating fans as needed.

Alarm code

Could not follow chain: Error opening chain file

Description

The controller could not open the next program in the chain. The current
program will continue to run until the chain problem is corrected.

Defaults

•

priority: 40

•

persistent

•

User Interaction Level: not accessible

Cause

Probable corrupt chain file.

Solution

1. Verify/correct the program to be chained to.
2. If the program is corrupt, it will need to be recreated.

Alarm code

Could not follow chain: Error opening program file

Description

The controller could not open the current program to follow the chain. The
current program will continue to run until the chain problem is corrected.

Defaults

•

priority: 40

•

persistent

•

User Interaction Level: not accessible

Cause

Probable corrupt program file.

Solution

1. Verify/correct the program to be chained to.
2. If the program is corrupt, it will need to be recreated.

Alarm code

Could not follow chain: Program not compatible

Description

The next program in the chain is not compatible with the controller
configuration and cannot be run.

Defaults

•

priority: 40

•

persistent

•

User Interaction Level: not accessible

Cause

Program is not compatible, usually because it was created in a previous
version of software or was copied from a chamber with a different
configuration

Solution

Create a new program on the controller and chain the original program to it.

Alarm code

Data Logging reset & stopped x

Description

1. The data log was reset on boot up and any data in it was lost.
x is the actual fault reason code

Summary of Contents for CMP4030






























































































Search results

Summary of Contents for CMP4030

Reviews:

Related manuals for CMP4030

Brands by name

Popular brands

Conviron CMP4030, User Manual

Search results

Summary of Contents for CMP4030

Reviews:

Related manuals for CMP4030

Brands by name

Popular brands