Chaining a Program to Itself
3-17
Chaining Several Programs
1. Access the Program Screen.
2.
Open the first program
in the chain.
3.
Touch the Chain Program
button
in the Program toolbar.
The Chain screen will display. The message in the Prompt display
field will read:
Enter file to chain to:
4.
Enter the second program number
using the keypad.
5.
Touch OK.
The controller will save the chain.
The Program screen will display. The program table cell
Information field will display the program number and extension.
before Chaining after Chaining
6.
Open the second program
.
7.
Touch the Chain Program
button in the Program toolbar.
8.
Enter the third program number
using the keypad.
9.
Touch the OK button
. The controller will save the chain.
10.
Open the third program
.
11.
Touch the Chain Program button
in the Program toolbar.
12.
Enter the first program number
. This will chain the third
program to the first program to form a loop. This must be done to
run the program continuously.
13.
Touch the OK button
. The controller will save the chain.
