Operator’s Manual: Bean Tender-Swing Conveyor (BTS)
3-4
Updated 09.2015
Fig 8 - Engine mount bolts
Fig 11 - Transport lock
Fig 9 - Conveyor pivot schematic
7'-7"
37'-3"
c
Fig 10 - Roller bracket pin (a), hole (b)
Engine Mount:
The bolts on the engine mount, set the position of the
engine base. Loosen the bolts to move the engine
base away from the drive pulley, disengaging the
belt. Tighten bolts to engage drive belt.
Always disengage belt when starting or stopping
engine. Set the belt tension so the belt does not slip
during operation.
Conveyor Swing:
The Conveyor can swing through a plus or minus 140°
arc. This allows it to fill more than one compartment,
without having to move the equipment.
Pivot Roller Bracket (Truck):
The conveyor sits on a roller bracket which can be
moved around the railing. It can be positioned at 9
different angles.
Always use the manual locking pin (a) to secure the
conveyor prior to starting the engine for unloading.
Transport Lock:
A transport lock is at each end of the pivot railing. It
is used to anchor the conveyor to the tender platform
during transportation.
a
b