Press this button to select audio channel.
Note:
Press the 'INFO & AUDIO' buttons together to switch output
resolution to 720p@60Hz instantly
Rear Panel
1.
SDI IN:
Connect with source equipment such as SNG camera or SDI signal
devices.
2.
HDMI OUT:
Connect with HD TV/monitor for output image display.
3.
SERVICE:
This slot is reserved for factory use only.
4.
CONTROL:
Connect from PC/Laptop for Telnet control with RJ-45 cable.
5.
RS-232:
Connect from PC/Laptop/RS-232 equipped device with D-Sub 9pin cable
for RS-232 command sending.
6.
DC 12V:
Plug the 12V DC power supply into the unit and connect the adaptor to an
AC outlet.
Remote Contro
l
1.
Power:
Press this button to switch on
the device or press it again to set it to
standby mode.
2.
Info:
Press this button to show system
information.
3.
Input CH 1~4:
Press these buttons to
rotate SDI 1~4 input source on each
channel to be display on screen
4.
WA~WH:
Press these hot keys to select
the screen setting where WA~WD are
display a full screen of each channel
and WE~WH are a different combination
of a full screen setting with all 4 channels.
5.
Mute:
